CM / CHEM / 001
Case of six Prep N Stick Quick Dry wheel-weight preparation bottles
Made in USA free of TCE and perc 32 oz x 6
Stick-on wheel-weight preparation

Prep N Stick Quick Dry

Make stick-on wheel weights stay stuck.

Purpose-built to prepare the wheel surface for adhesive stick-on weights. Remove the old weight, spray and wipe the old bond area clean, then apply a second spray and let it dry for a few seconds. Do not wipe off the final application. Install the new weight on the prepared surface.

Text Michael
Michael Frederick, National Accounts · Text (855) 388-1309
Ask this bottle anything Product Q&A

Fewer Comebacks

Prepare the bond area so stick-on wheel weights stay where the tech put them.

Wheel-Finish Safe

Safe for standard and custom wheel finishes, including clear coat and custom paint. Test specialty, refinished, ceramic-coated, or unknown finishes in an inconspicuous area first.

Buyer Ready

The SDS, the TDS, and a person who answers the phone.

Wheel prep field guide Which prep belongs on this wheel? Get the shop-ready method for painted, clear-coated, chrome, and bare wheel surfaces, plus the failures that make weights fall off. Open wheel prep guideSurface by surface
Watch it before you reach out

Three minutes. Three shop-floor problems.

Tire Review put the wheel-prep problem on camera. Watch the demonstrations, then text Michael when you want to test it in your own bays.

Single 32-ounce Prep N Stick Quick Dry spray bottle
32 oz / Shop Bottle
Case of six Prep N Stick Quick Dry bottles with retail carton
Six Bottles / One Case

Built to live beside the balancer.

A full-size trigger bottle for cleaning the exact bond area before adhesive wheel weights go on, packed six to a case.

FormatTrigger spray
UseStick-on weights
Volume32 fluid oz
Customer-reported yieldAbout 100 to 150 wheels
Case pack6 bottles
OriginMade in USA
One job, done correctly

Brake cleaner was built for brakes.

Prep N Stick was built for the exact patch of wheel where a stick-on weight has to hold. The point is not another chemical on the shelf. It is one less balanced wheel coming back.

01

Prepare the bond area

Use Quick Dry for light road film and brake dust. Remove heavy grease, oil, tire lube, silicone dressing, and old adhesive before the final clean.

02

Flash dry quickly

No water rinse is required, and no residue is known to interfere with pressure-sensitive wheel-weight adhesive when used as directed.

03

Protect the finish

Use a formula intended for wheel preparation instead of reaching for a harsh general-purpose solvent.

04

Standardize the process

One product, one application method, and one documented answer when a buyer asks what the shop uses.

Remove. Clean. Prep. Stick.

Use two spray passes. Wipe away the old residue after the first. Let the second pass dry for a few seconds, then install the new weight.

Technician removing old adhesive wheel weights
01

Remove the old weights

Take off the existing tape weights and scrape away the bulk of the old adhesive.

Prep N Stick Quick Dry sprayed over old wheel-weight residue
02

Spray and wipe clean

Spray the old weight area, then wipe away the remaining adhesive, dirt, and residue with a clean, dry cloth.

Second application of Prep N Stick Quick Dry on the clean bond area
03

Spray again. Let it dry.

Apply a second, even spray to the clean bond area. Let it dry for a few seconds. Do not wipe off this final application.

Technician installing new adhesive wheel weights on the prepared wheel
04

Apply the new weights

Install the new tape weights on the prepared surface using the shop's standard placement and pressure procedure.

A person, not a checkout

Talk to Michael about your shop.

Cases, samples, distributor setup, multi-location pricing, and the documentation your purchasing team needs.

Text Michael Email Michael
Prep N Stick video
Questions or shop pricing?Michael Frederick Text

Published documentation

Specific beats vague.

The handling facts, product format, and current source documents are here before the bottle reaches the floor.

ChemistryAcetone-based and fast-evaporating. No water rinse is required after spray, wipe, and full dry. No residue is known to interfere with pressure-sensitive wheel-weight adhesive when used as directed.
Free of TCE and percFree of TCE and perc.
HandlingFlammable. DOT UN1090, Class 3. Store, use, and dispose of it per the SDS, away from ignition sources.
FinishesSafe for standard and custom wheel finishes, including custom paint and clear coats. Test specialty, refinished, ceramic-coated, or unknown finishes in an inconspicuous area first.
Read the SDSAll documentationFormula disclosureWhy TCE matters

Trichloroethylene was classified as a human carcinogen by the EPA and by the International Agency for Research on Cancer, and the EPA has finalized a rule banning it under the Toxic Substances Control Act. Portions of that rule covering industrial uses remain in litigation before the Third Circuit. This note describes the regulatory status of TCE, not a health claim about any CHAOS product.

Safety Data Sheet publishedMade in the USAMajor cards accepted Shop and fleet pricing available