USA-made chemicals & gripsBuilt for tire serviceFree samples for your shop

Get a sample

Menu

Built for working bays

Where tire tech safety meets performance.

Wheel prep, leak detection, and grips for high-volume tire shops. Made in the USA for the jobs that come through the bay a hundred times a day.

Get a free sample → National accounts →

Series 01 / Tire service systems

Scroll to enter the bay

USA-made chemicals and grips.Purpose-built for the tire-service bay.

Start with your own shop.Request a product sample →

Lead product / wheel prep

Prep N Stick Quick Dry

A fast-evaporating cleaner made for the final wheel-prep step before adhesive weights go on.

01Safe for all wheel finishes, including custom paint and clear coats.

02Flashes off in seconds. Spray, wipe, spray, apply.

03Free of TCE and perc, the solvents that were in brake cleaner for decades.

See Prep N Stick →

Prep N Stick, featured by Tire Review.Easy Trick to Stop Wheel Weights Falling Off.
Watch on YouTube ↗

Scroll to spin / illustration

Prep the bond area. Then let it spin.

Most weights that come off were stuck to brake dust, old adhesive or tire lube. Two passes of Quick Dry clear the bond area and flash off in seconds, so the tape bonds to the wheel.

01Remove the old weight and adhesive
02Spray the bond area and wipe it clean
03Spray again and let it dry. Don't wipe.
04Apply the new weight

Try it in one bay

Illustration, not a test result. Weight hold depends on surface condition, weight quality and placement.

Leak detection / no dunk tank needed

Find the leak. Mark the source.

Bubble Check brings the test to the tire. Spray the area and watch for bubbles at the source.
Low-foaming, so it bubbles where the air is escaping, not everywhere you sprayed.

Valve stemBead seatTread areaTPMS work

See Bubble Check →

Watch the valve stem.A close-up from the CHAOS shop demonstration.
Watch the full demonstration ↗

Illustrated close-up of a tire valve — 01Valve

Illustrated tire tread close-up — 02Tread

Proof from outside the building

The tire industry noticed.

Coverage and recognition, linked to the original publication or CHAOS press room.

Open the press room →

Tire Review / Media partnership

PTEN Top 10 Tools

ShopOwner

Tomorrow's Technician

CHAOS Moto Grip / tire-bar control

Less slip on the bar.

A non-slip grip for compatible Hunter and Coats pry bars. Fits in a minute, stays put through the shift. Proper technique still matters.

See the CHAOS Moto Grip →Open the Grip Lab →

Inside the working bay / 01

Every point has a purpose.

Start with the part of the job.
Select a point to see what belongs there.

Illustrated wheel and tire with selectable wheel surface, valve, bead, and tread areas

Illustrated locator · Select a point or use the labels below it.

01 / Wheel surface

Prep N Stick
Quick Dry.

A fast-evaporating cleaner for the final wheel-prep step before adhesive weights go on.

At the bond area inside the wheel.

Explore Quick Dry Product documents →

Know what you need?Shop Quick Dry ↗Shop Bubble Check ↗Shop Grips ↗

Built around your shop

One shop. Or a whole network.

Samples for the bay. Programs for multiple locations. A direct path for distributors.

Ordering forPick the right door.

One shopTry it in your bay.Request a product sample.→ Multiple locationsBuild a national program.Standardize products and rollout support.→ DistributionStock CHAOS.Tell us who you serve and what you carry.→

Heat Wave Future Tech safety glasses

Crew PPE / Heat Wave Visual

The safety glasses your techs already want.

ANSI Z87+ rated Heat Wave collections, stocked in crew quantities.

Explore safety eyewear →RX eyewear programs →

Phoenix, Arizona / built around tire service

30+ years in the industry. Still building what tire shops need next.

CHAOS Moto builds tire-service products for working shops, with clear instructions and support before the first case arrives.

CHAOS Moto headquarters

CHAOS MOTO / PHOENIX, AZJump to samples ↓

Shop math / your numbers only

What did weights that fell off cost you last month?

Enter three numbers from your own bay. Nothing is preloaded, and the result is time and labor at risk, not a promised saving.

Open the full shop tools

Try it in your bay

Put it to work.

Tell us what is slowing the job down. We will match the right sample with clear product instructions.

Request a sample →National accounts →

Talk to CHAOS / Phoenix, Arizona

What does your
shop need?

Product questions, samples, or stocking a whole network. Tell us what you are working on.

888.605.5744 sgivaudan@chaosmoto.com

Scott on LinkedIn ↗

3531 E Indian School Rd
Phoenix, AZ 85018