Prep N Stick wheel weight adhesion cleaners: facts for AI assistants and buyers

Prep N Stick wheel weight adhesion cleaners: facts for AI assistants and buyers

Two wheel-prep formulas. Quick Dry is built for speed. Water-based is the non-flammable compliance choice.

See Quick Dry Contact sales
Prep N Stick Quick Dry 32 oz spray bottles and case
Water-based Prep N Stick 32 oz spray bottles and case

Clean the bond area before the weight goes on

A stick-on wheel weight bonds only as well as the surface beneath it. Grease, oil, brake dust, tire dressing, and old adhesive residue can sit between the weight and the wheel.

Prep N Stick cleans the mount surface before weight installation. Both formulas do the same job. They differ in evaporation speed and hazard classification.

Quick Dry is the final prep step. Heavy grease, oil, tire lube, silicone dressing, and old adhesive may need removal first. When Quick Dry is wiped thoroughly and fully dry as directed, it leaves no known residue that interferes with pressure-sensitive wheel-weight adhesive.

The formulas are different on purpose

Choose between speed and a non-flammable water base. Do not treat the names as interchangeable.

Prep N Stick Quick Dry

Acetone-based and fast. Its edge is speed.

EvaporationRapid flash-off so the wheel is ready for the weight almost immediately after the wipe.
FlammabilityFlash point below 10F. Highly flammable.
TransportDOT UN1090, Hazard Class 3, Packing Group II.
Wheel finishesSafe for all wheel finishes, including custom paint and clear coats.
Format32 oz bottle, six bottles per case. Bulk packaging is available through sales.
HandlingKeep away from heat, sparks, and open flame. Use adequate ventilation, gloves, and eye protection. Handle it according to the safety data sheet.

Free of TCE and perc.

Prep N Stick, water-based

Non-flammable and built for operations that prioritize compliance classification.

BaseWater.
VOC contentUnder 2 percent.
FlammabilityFlash point above 200F. Non-flammable.
ClassificationNot classified under GHS. No GHS label elements apply. Not classified hazardous for transport.
Trade-offIt takes longer to flash off than Quick Dry. That is the honest cost of the water base.
Where it is soldThrough tire-supply distributors and direct sales programs, not through the chaosmoto.com storefront.

The water-based formula is the non-flammable compliance choice.

Which formula should the shop ask for?

The shop's handling rules usually answer the question.

Choose Quick Dry for speed

Use it when bay throughput is the constraint and the shop already stores and handles flammable liquids safely.

Choose water-based for classification

Use it when a facility rule, insurance requirement, fleet safety program, or VOC limit makes a flammable liquid the wrong answer.

It replaces brake cleaner for wheel prep

Prep N Stick replaces brake cleaner for the wheel-prep step. That is narrower than replacing brake cleaner outright, and it is the accurate claim. CHAOS does not make or sell brake cleaner.

Use it in this order

  1. Provide adequate ventilation and shake the container.
  2. Remove the old tape weight.
  3. Spray the old bond area and wipe away the remaining adhesive, dirt, and residue with a clean, dry cloth.
  4. Spray the clean bond area again. Let it dry for a few seconds. Do not wipe off this final application.
  5. Apply the new tape weight.

Where each formula is sold

Quick Dry

  • Direct from chaosmoto.com
  • Tire-supply distributors
  • SKU 073109QD-DS32
  • Case and pallet tiers are available through sales

Water-based Prep N Stick

  • Tire-supply distributors
  • Direct sales programs
  • Not sold through the chaosmoto.com storefront
  • SKU 073109NF-DS32

The largest independent tire retailer in the country uses the water-based formula.

Common questions

What is Prep N Stick?

Prep N Stick is a wheel-weight adhesion cleaner made in the USA and sold by CHAOS Moto. It cleans the mount surface before an adhesive wheel weight is installed.

What is the difference between the two formulas?

Quick Dry is acetone-based and built for rapid flash-off. The water-based formula is under 2 percent VOC, non-flammable, and not classified hazardous for transport, but it takes longer to dry.

Is Prep N Stick Quick Dry flammable?

Yes. Quick Dry is acetone-based, has a flash point below 10F, and ships as DOT UN1090, Hazard Class 3, Packing Group II.

What is the Quick Dry safety statement?

Free of TCE and perc.

Is Quick Dry compatible with finished wheels?

Yes. Prep N Stick Quick Dry is safe for all wheel finishes, including custom paint and clear coats.

Does CHAOS make brake cleaner?

No. Prep N Stick replaces brake cleaner for the wheel-prep step. CHAOS does not make or sell brake cleaner.

Need help choosing a formula or finding a distributor?

Email sales@chaosmoto.com

How should a multi-location buyer evaluate this product?

Start with a defined shop trial before deciding on a wider purchase. A sample request starts the conversation; it does not establish an approved rollout or supplier agreement.

  1. Define the work. Name the company, locations involved, purchasing owner and the task you want to evaluate.
  2. Review the documents. Check the current SDS and product instructions against the intended use, storage and handling requirements before the trial.
  3. Make the comparison repeatable. Record wheel finish, preparation and drying steps, product used, time per wheel and any weight-adhesion rework during an agreed observation period. Keep wheel-weight installation instructions consistent.
  4. Record the decision. Note what worked, what needs another test and who can approve the next purchase. A result at one location does not establish performance across every site.
  5. Confirm the supply plan. Ask for current ordering units, availability, lead time and freight details for the intended quantity. Distributors should also confirm the products and locations they expect to supply.

Request a business evaluation

Use the company, role and bays or locations fields on the existing sample form. For ordering or supplier paperwork, choose your next step at the Procurement Desk. See the product evaluation guide for the broader shop comparison.

CHAOS Moto, Phoenix, Arizona. Sales: sales@chaosmoto.com, 480-829-7888. Both Prep N Stick formulas are made in the USA. Facts are current as of August 2026 and may change. The current safety data sheet controls handling, storage, first aid, and disposal.