Answer a few questions about your shop below. We will do the arithmetic, live, on your numbers only. No industry averages, no promised savings, just what you told us, added up.
Wheel weight adhesion cleaner. Acetone-based and fast-evaporating, so the edge is speed getting the tech back to the next car. It is free of TCE and perc, and it is safe on every wheel finish, including custom paint and clear coats. Sold in 32oz bottles, by the case of 6.
Spray-on tire leak detector. No dunk tank needed. It pinpoints valve and bead leaks so the tech can see exactly where the air is going. 32oz bottle with a trigger sprayer, sold by the case of 6.
This number is the cost of the minutes at the tank, not the number of leaks you check. A spray-on check does not change how many wheels need checking. It changes how many minutes each one takes.
Non-slip grip for Coats and Hunter pry bars and tire levers. It attacks the scratching and the hand slippage that causes it. $19.95 each for the CHAOS Moto Grip, $14.95 each for the Max bead breaker grip.
Pairs with Slicks Glasses, ANSI Z87.1+ anti-fog safety glasses sold by the box of 12, for the hand-and-eye safety side of the same story.
Every number on this page comes from the sliders above. We do not add an industry average, we do not assume a savings percentage, and we do not know your shop better than you do.
What we will say is plain: a comeback you never have, a dunk tank you never fill, and a wheel that never gets scratched are the cheapest jobs in the shop. Test the products above and watch your own number move.
Print the report, run the numbers past whoever signs the PO, and see what the sample changes.
| Line item | Formula | Cost / month |
|---|---|---|
| Wheel-weight comebacks | ||
| Dunk-tank leak checks | ||
| Scratched wheels |
